Dissolving Method Of Polyacrylamide

Introduction of polyacrylamide: Polyacrylamide (PAM) is a water-soluble polymer, insoluble in most organic solvents, has good flocculation, can reduce friction resistance between liquids, according to the ionic properties can be divided into non-ionic, anionic and cationic type three types. Polyacrylamide flocculant is widely used in thickening, stabilising colloid, drag reduction, bonding, film formation, biomedical materials and so on. It is used as coagulant aid, flocculant and sludge dewatering agent in water treatment. It is used as water-reducing agent and oil repellent in oil drilling. Used as retention aid and reinforcing agent in papermaking process. Dissolving method of polyacrylamide: First, direct dissolution method 1. Choose suitable container. When dissolving polyacrylamide, it needs to be fully stirred, so choose the container with large volume and capable of stirring as much as possible. Thus, the powder will be dispersed in water as evenly as possible. 2. Prepare the required materials. In addition to polyacrylamide and water, some common reagents, such as sodium bicarbonate, hydrochloric acid and so on. These reagents are used to adjust the pH value, dissolution rate, etc. 3. Add polyacrylamide into the container. Due to the high molecular weight of polyacrylamide, the powder is not easy to dissolve in water, so it needs to be dispersed and stirred to avoid lumping and agglomeration. 4. Add auxiliary reagent. Commonly used auxiliary reagents include sodium bicarbonate, acetic acid, hydrochloric acid and so on. The purpose of adding these reagents is to adjust the PH value, accelerate the dissolution speed. 5. Perform thorough mixing. It can improve the dissolution speed of polyacrylamide, and at the same time avoid lumps, coagulation and other phenomena. 6. Wait for the solution to stabilise. Because the stability of polyacrylamide in water is poor, easy to degrade, decomposition, will affect the use of the effect, need to wait for the solution to stabilise. 7. Use the solution in time. Because the stability of polyacrylamide in water is poor, easy to degrade, decomposition, please use in time. Tel/WhatsApp：86 15936201203 Email：maggie@xhwtm.com Contact:Maggie